Resultado de búsqueda
Lifecycle status: DISCONTINUED. Rockwell Automation announces that as of December 16, 2020 , the CompactLogix 750KB Enet Controller will be discontinued and no longer available for sale.
- Manual del usuario
1769 CompactLogix Controllers Specifications Technical Data,...
- CompactLogix Controllers Specifications
CompactLogix 5370 Controllers CompactLogix 5370 Controllers...
- Find Downloads
1769-L32E (Series A) 20.013. CompactLogix L32E controller....
- Manual del usuario
- Important User Information
- Preface
- Design a CompactLogix System
- Parts List
- Install a CompactFlash Card (optional)
- Mount the System
- Mount the Panel
- Connect the Controller to the Network via a ControlNet Tap
- Use the ControlFLASH Utility to Load Firmware
- Communicate over Networks
- Connections over ControlNet Network
- Description
- Step 1: Set Broadcast-Controller Properties
- Step 2: Set Broadcast - Create Controller Scope Message Tag
- 75 Send and Receive Messages
- Place, Configure, and Monitor I/O
- Estimate Requested Packet Interval
- Configure Distributed I/O on a DeviceNet Network
- Address I/O Data
- Develop Applications
- Define Routines
- Monitor Controller Status
- Determine if Device Communication Has Timed Out
- How Equipment Changes States
- Compare PhaseManager to
- Via RSLogix 5000 Programming Software
- Manually Change the Load Parameters
- Additional Resources
- Status Indicators
- CompactFlash Indicator
- RSLinx Tag Optimization
- Specify Connections per PLC Controller
- Specify Number of Connections Needed to Optimize Throughput
- Number of Connections Needed to Optimize Throughput
- View the Number of Open Connections
- Rockwell Automation Support
- New Product Satisfaction Return
Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes s...
Use this manual to become familiar with the CompactLogixTM controller and its features. This manual describes the necessary tasks to install, configure, program, and operate a CompactLogix system. In some cases, this manual includes references to additional documentation that provides the more comprehensive details.
When designing a CompactLogix system, determine the network configuration and the placement of components in each location. To design your CompactLogix system, you must select the following: I/O devices A communication network Controllers Power supplies Software Notes: Chapter 2
These components are shipped with the controller. You may also use these components with the controller.
WARNING: When you connect or disconnect the battery, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding. For safety information on the handling of lithium batteries, including handling and disposal of leaking batteries, see Guide...
ATTENTION: During panel or DIN-rail mounting of all devices, be sure that all debris (such as metal chips or wire strands) is kept from falling into the controller. Debris that falls into the controller could cause damage while the controller is energized.
Mount the controller to a panel by using two screws per module. Use M4 or #8 panhead screws. Mounting screws are required on every module. This procedure lets you use the assembled modules as a template for drilling holes in the panel. IMPORTANT Due to module-mounting hole tolerance, it is important to follow these procedures. On a clean work surfa...
Typically, ControlNet taps are used to make permanent connections from the CompactLogix controller to the network. Perform the following steps to connect the module to the network by using a ControlNet tap. ATTENTION: Do not allow any metal portions of the tap to contact any conductive material. If you disconnect the tap from the module, place the ...
You can use the ControlFLASH utility to load firmware through a serial connection. Make sure the appropriate network connection is made before starting. Start the ControlFLASH utility. When the Welcome dialog box appears, click Next. Choose the catalog number of the controller and click Next. Expand the network until you see the controller. If the ...
This chapter explains how CompactLogix controllers support additional networks to enable various functions.
You indirectly determine the number of connections the controller uses by configuring the controller to communicate with other devices in the system. Connections are allocations of resources that provide more reliable communication between devices compared to unconnected messages. Table 7 - ControlNet Connection Methods
scheduled connection is unique to ControlNet communication. A scheduled connection lets you send and receive data repeatedly at a set interval, which is the requested packet interval (RPI). For example, a connection to an I/O module is a scheduled connection because you repeatedly receive data from the module at a specified interval. Other schedule...
First, set the System Protocol by following these steps. In the Controller Organizer, right-click on the controller and choose Properties. In the Controller Properties dialog box, from the System Protocol tab, choose the settings for the controller, then choose OK.
Next, create a Message tag by following these steps. In the Controller Organizer, right-click on the Controller Tags folder choose New Tag. The new tag must be a ‘message’ tag. Name the tag and select the Data Type ‘Message’, then choose OK. and The Message tag in the Controller Scope’s Controller Tags folder will look similar to the following.
The number of available connections limits the total number of tags that can be produced or consumed. If the controller uses all of its connections for I/O and communication devices, no connections are left for produced and consumed tags. Messages transfer data to other devices, such as controllers or operator interfaces. Messages use unscheduled c...
This chapter explains how to place, configure, and monitor CompactLogix I/O modules.
The requested packet interval (RPI) defines the frequency at which the controller sends and receives all I/O data on the backplane. Each module on the backplane can have its own individual RPI setting. The effective scan frequency for any individual module is still impacted by the other modules in the system and those modules’ RPI settings. The fol...
To communicate with the I/O modules over a DeviceNet network, add the DeviceNet bridge to the I/O Configuration folder of the controller. RSNetWorx for DeviceNet software is used to define the scanlist within the DeviceNet scanner to communicate data between the devices and the controller through the scanner. Figure 15 - DeviceNet Distributed I/O C...
I/O information is presented as a set of tags. Each tag uses a structure of data, depending on the specific features of the I/O module. The name of the tags is based on the location of the I/O module in the system. Figure 16 - I/O Address Format Location :Slot :Type .Member .SubMember .Bit = Optional CompactLogix controllers update data asynchronou...
This chapter explains how to develop applications.
routine is a set of logic instructions in a single programming language, such as ladder logic. Routines provide the executable code for the project in a controller. routine is similar to a program file or subroutine in a PLC or SLC controller. Each program has a main routine. This is the first routine to execute when the controller triggers the ass...
The CompactLogix controller uses Get System Value (GSV) and Set System Value (SSV) instructions to get and set (change) controller data. The controller stores system data in objects. There is no status file, as in the PLC-5 processor. The GSV instruction retrieves the specified information and places it in the destination. The SSV instruction sets ...
If communication times out with at least one device (module) in the I/O configuration of the controller, the I/O status indicator on the front of the controller flashes green. The GSV instruction gets the status of the I/O status indicator and stores it in the I_O_LED tag. If I_O_LED equals 2, the controller has lost communication with at least one...
The arrows in the state model show how your equipment can transition from one state to another. Each arrow is called a transition. A state model lets the equipment make only certain transitions. This transition restriction standardizes equipment behavior so that another piece of equipment using the same model will behave the same way. Table 28 - Ph...
You can compare PhaseManager’s state models to other common state models.
To find the controller’s serial number in RSLogix programming software, follow these steps. In the controller organizer, right-click on the controller and select Properties from the pull-down menu. The Controller Properties dialog box displays. Click the Advanced tab to see the serial number.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
- 7MB
- 150
CompactLogix. Brand: Allen-Bradley | Category: Controller | Size: 7.19 MB. Chapter 1 Design a Compactlogix System. Chapter 2 Install the 1769-L3X Controllers Verify Compatibility. Chapter 3. Communicate over Networks. Chapter 4 Ethernet/Ip Network Communication. Chapter 5. Manage Controller Communication. Chapter 6.
