Resultado de búsqueda
- Important User Information
- Preventing Electrostatic Discharge
- Additional Resources
- Wire Size and Terminal Screw Torque
- Labeling the Terminals
- Configuration Data File
- Bit 15 and Bits 7...4 - Reserved
- Filter Select (Bits 3...0)
- Rockwell Automation Support
- New Product Satisfaction Return
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some i...
ATTENTION This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment: Touch a grounded object to discharge potential static. Wear an approved grounding wriststrap. Do not touch connectors or pins on component boards. Do not touch circuit...
If you would like a manual, you can: download a free electronic version from the Internet: http://literature.rockwellautomation.com purchase a printed manual by contacting your local Allen-Bradley distributor or Rockwell Automation representative
Each terminal accepts up to two wires with the following restrictions:
A write-on label is provided with the module. Mark the identification of each terminal with permanent ink, and slide the label back into the door.
The configuration of the format for analog inputs is made at going to run (GTR). Changes made to the configuration file while in run mode have no effect. The configuration table is shown below.
These bits are reserved and are not checked by the module.
These bits indicate the filter (for desired normal mode rejection) as shown in the table below. Other combinations of these bits are not supported and result in an error.
Rockwell Automation provides technical information on the Web to assist you in using its products. At http://www.rockwellautomation.com/support/, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best ...
Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
- 1MB
- 24
Voltage: -10.5...10.5V DC, Current: -21...21 mA. Repeatability. -0.12 to 0.12%. Input and output group to system isolation. 30V AC/30V DC rated working voltage (N.E.C. Class 2 required) (IEC Class 2 reinforced insulation) type test: 500V AC or 707V DC for 1 minute.
Ubique el sistema de E/S lo más cercano posible a los detectores o accionadores de tipo voltaje. El módulo 1762-IF4 no proporciona lazos de alimentación para entradas analógicas. Utilice una fuente de alimentación eléctrica que sea compatible con las especificaciones de entrada del transmisor.
- 851KB
- 24
Compre Módulo E/S para PLC Allen Bradley 1762, para usar con MicroLogix 1100 Series, MicroLogix 1200 Series, MicroLogix 1400 1762-IF4 Accesorios para Controladores y Autómatas en RS Online y disfrute de una entrega en 24 h, un excelente servicio y el mejor precio del distribuidor líder en componentes electrónicos.
- Allen Bradley
- 1
Allen Bradley 1762-if4 Modulo De Entradas. $ 7,950. en. 24x. $ 480. Envío gratis. Modulo 1769-if4 Compactlogix Allen Bradley. $ 11,100. en. 18 meses sin intereses de. $ 616. Envío gratis. 5.0 (1) Allen-bradley 1762-if4 4ch Analog Input Module Micrologix. $ 8,000. en. 18 meses sin intereses de. $ 444. Envío gratis.
Información del producto: 1762-IF4 ALLEN-BRADLEY MICROLOGIX 1200 ANALOG INPUT MODULE 1762IF4. OFERTAS. Ubicación / Stock Disponible / Precio: - Condiciones: NUEVOS. - Los Precios publicados son Unitarios, en pesos mexicanos, más IVA. - Los Precios y Existencias publicados son REALES, se actualizan diariamente.
